Review LEPIN 31001 Scorpion Pyramid- Compatible with LEGO 7327

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name: Scorpion Pyramid
  • No.: 31001
  • Listing Date: 2018
  • Number of parts: 822
  • Ages: 10+

I had the set in my shopping spree at 11.11. ordered and had yesterday finally made the long and arduous journey to me. It was probably because of the 3D plate in a neutral, white box.
This set of plays is, therefore, something special for me since I had almost all sets from the 1998 series “Egypt” of the adventure theme in my childhood. The highlight of my collection at the time was the Sphinx, only the Temple of Anubis and a few smaller sets were missing. At that time I would have liked a pyramid, but unfortunately, the Danes did not design it. Nevertheless, I like to remember the many hours in which I listened to the accompanying radio play with my friends and followed the events with the characters.
In 2010, Lego apparently answered my request and reissued the topic, this time with a corresponding pyramid. While rival research teams had to survive in 1998, the protagonists in the new series “Pharaoh’s Quest” have to fight against cursed mummies and giant animals.

During the construction, I did not take any pictures, because it was quite easy to do – the construction manual is large and clear, the structure itself for each terminal block to accomplish and exceptionally missing some parts (but two parts had the wrong color). The quality I think is very good, but I can not make a direct comparison to Lego, because I only have the Lepin version.

Review LEPIN 31001 - Scorpion Pyramid
THE SET IN ALL ITS GLORY

Here is a beautiful pyramid with some game features that work well, a giant scorpion, seven figures and a vehicle offered.

Review LEPIN 31001 - Scorpion Pyramid
VIEW FROM BEHIND IN THE INSIDE OF THE PYRAMID

The game features include a mechanical door, a fold-up staircase, a trap door with falling stones, and a lever-arched wall with a sarcophagus display.

Review LEPIN 31001 - Scorpion Pyramid
THE SEVEN FIGURES CONTAINED

I do not want to say much about the characters. They are very close in design to those of 1998. However, the Anubis guards and the winged mummy are really well done. Also included were two red snakes, a green snake, three black scorpions and a few “Lepin coins” (very far from the original).

Also, my previous experiences (based on Star Wars) like “Lepin can stone, but not figures” I have to rethink this set again because the characters have become really good. A single Anubis guard I had previously bought at another dealer, the comparison can be seen in the following picture:

Review LEPIN 31001 - Scorpion Pyramid
ON THE LEFT THE FIGURE FROM THE DEALER, ON THE RIGHT THE FIGURE CONTAINED IN THE SET

The golden print looks much nicer with the figure and also the legs are printed.

The Halbkettenfahrzeug looks in my opinion very chic.

Review LEPIN 31001 - Scorpion Pyramid
Review LEPIN 31001 - Scorpion Pyramid

The wheels look better with the Lepin variant, as spokes can be seen here. There are no spokes on the Lego version (only photos available). The rubber of the chains is soft, only the shape does not quite fit.

Review LEPIN 31001 - Scorpion Pyramid
THE SCORPION

Personally, I would not have needed the scorpion now. The scissors are made quite well, but I find the legs poorly implemented.

Conclusion: If I draw a comparison to the initially mentioned sphinx, then you can quickly see the strengths and weaknesses of this kit:
+ The figures look good and are also numerically represented.
+ Of course, the color scheme is mostly tan, but there are some dark blue and gold accents, and tan is also lighter and darker. That provides a variety.
– Sticker! In 1998 it was still bothering to print all hieroglyphs on the stones. There were very few stickers back then. But with this set, you really have to stick everything on.
– The 3D-plate has become good, but uniform in one color. To make it look a little like Egypt, you have five stickers stuck on it. That looked much nicer in 1998, but it’s also an opportunity for people who want to use the record for a different model.

You can see similar products here

Review LEPIN 16011 Medieval Market Village – Compatible with LEGO 10193 (Retired)

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name: Medieval Market Village
  • No.: 16011
  • Listing Date: 2018
  • Number of parts: 1601
  • Ages: 10+

Was delivered in a black bag

In which then the set was packed again in bubble wrap

Review LEPIN 16011 - Medieval Market Village / Medieval Marketplace

Then to be held together in a transparent bag

Review LEPIN 16011 - Medieval Market Village / Medieval Marketplace

First, the instructions come to light

Review LEPIN 16011 - Medieval Market Village / Medieval Marketplace

This was provided with a teasing sticker which was easy to remove without residue

Review LEPIN 16011 - Medieval Market Village / Medieval Marketplace

The set also contains a bag of six stickers which I hope I can leave out. The stickers make a good impression and have a clean printing.

Review LEPIN 16011 - Medieval Market Village / Medieval Marketplace

There are 37 bags with building blocks in total. These seem to be printed in addition to the usual LEPIN numbering after building steps (1 to 3).

Review LEPIN 16011 - Medieval Market Village / Medieval Marketplace

Here is the bag with the highest (37) numbering

Review LEPIN 16011 - Medieval Market Village / Medieval Marketplace

A zipper bag is included and has a hand-applied number (27)

Review LEPIN 16011 - Medieval Market Village / Medieval Marketplace

So, now we come again to the above-mentioned construction steps … There are none :eh: At least there is not a single hint in the construction manual on possible construction steps.

Review LEPIN 16011 - Medieval Market Village / Medieval Marketplace
111.jpg

After the first sighting, I am now going to build up and will continue to report after …

You can see similar products here

Review LEPIN 17005 Big Ben Elizabeth Tower – Compatible with LEGO 10253 (Retired)

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name: Big Ben Elizabeth Tower
  • No.: 17005
  • Listing Date: 2018
  • Number of parts: 4163
  • Ages: 10+

Get up close to Big Ben! The clock was first started on May 31st 1859, and Big Ben’s first chime rang from the 96-meter Elizabeth Tower on July 11th of the same year. This over 23â€?(60cm) high interpretation of the iconic structure is a tribute to its engineering and architecture. It features a detailed facade with statues, shields and windows, and a clock tower with 4 adjustable clock dials and a removable roof allowing access to the belfry, plus buildable exterior elements including a sidewalk, lawn and a tree depicting the building’s location. This model makes a great display piece for the home or office.

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben

Big Ben features a detailed section of the Westminster Palace and the adjoining Elizabeth Tower, 4 detailed clock dials with movable hour and minutes hands, and a sidewalk, tree and grass area depicting the building’s location.

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben

Rare elements include ski poles, flowers and corner plates in molded gold color, and tinted-translucent elements.

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben
The old trick with the tongs. just squeeze the stems of the trees together with the tongs,
and by the broadening of the pad, the “leaves” hold much better
Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben
sooooo many parts were left
Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben

Review LEPIN 17005 - Big Ben
Review LEPIN 17005 - Big Ben

You can see similar products here

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

✔Brand Name: LEPIN

✔ Item No: 16050

✔Compatible: LEGO 21310

✔Pieces: 2294

✔Ages: 6 years and above

I also mention here again. For “me” it is the best quality Lepin set I have.
All stones are stuck. These include 1er plates and tiles.
However, the doors have now been spoiled. When closing, they bend slightly. So that means the cams are too big or the doors too long and do not fit 100% in the frame.
All construction phases were counted very accurately. Not a single part was left over after the respective construction phase.Incidentally, no one was missing. The small spare part bag will remain unopened.

Since GGAM has not included any instructions, I had to resort to the L3GO pendant and can thus confirm that everything can be 100% “nqchgebaut”.

The building is built very solid, but unfortunately also implemented a bit wasteful. One could well have built a wine cellar / treasury or other in the back.
Ansich it is very detailed equipped. Almost overloaded for my taste.

What I do not like is the chimney. This is just on the plate and ensprechend diagonally in the installed state. Straight up I would have found personally successful.

There are only a few printed parts. The name tag, and the usual …. money, murals, cards …
It means in reverse …. so there are some stickers. These are of good quality and delicately translucent.
The respective part colors were not quite hit. But I almost think that it will be similar to the Danes.

minifigs

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Here is the substructure. I think super substructure made of wood. You can see them later only through the site.
Theoretically, the rear part would be “walkable”. In my opinion unfortunately a little wasted space. Here I would have found a wine cellar, an old pirate’s treasure or a fish storage appropriate.
Well, I also think the indicated rock formations.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Here are the pictures after step 2. It will be colorful. different wood tones …
The lower tiled level bulges a bit. In the later course of the construction, you hardly see it.
It may be because there is a small cavity on the left.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

The interior is created. To get back to the tile theme … mMn would not have been here 1.er tiles are used, but 1×2 or the triangular.
The folding lower wall was also colorfully designed.
Slowly also the outer detail-rich takes shape.
Anyone who has not received a rotary worm in modular construction yet will get their money’s worth here.
The stone rows and the later Verplankung let the model rotate continuously. Personally, it annoyed me a bit.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

The interior is growing slowly. For the upper part of the building is quickly increased. Everything first without planking.
Meanwhile, the upper balcony with its wooden pillars is completed.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

The fishing shop was lavishly equipped. Since there are still the 3 fish boxes are housed, I think the whole thing is almost overloaded.But also very detailed.

 

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Here is already the 2 folding door and he gable finished. Then there is again rotation with the planking. Here again a picture in the fishing shop.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

And here you can admire the detailed roof. As I said. The chimney is inclined later. If you could have made mMn better.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Subsequently, the construction of the small tower with weathercock and telescopes took place.

On the whole, I’m very happy.

Currently it’s “fitting” here. Whether this is such a good idea, time will tell. Apart from that you could expand with time by a small boat and sea / sea.

So. More I just can not think of. Except the transport due to some parts have scratches.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

You can see similar products here

Review LEPIN 33001 Wild West Fort Legoredo competiable with LEGO 6769

Review LEPIN 33001 Wild West Fort Legoredo competiable with LEGO 6769

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name: Wild West Fort Legoredo
  • No.: 33001
  • Listing Date: 2018
  • Number of parts: 742
  • Ages: 12+

LINK YOUTUBE

Today brings a special set of special, from the ancient series more than 20 years ago, a flagship set in the west.

This set first appeared in 1996 and is numbered 6769. Then re-enacted in 2002, the number is 6762 (I don’t know why the number will be before the first edition…)

package

I am going to reclaim the things I had 20 years ago, and I saw from the box that this should be copied from the original…

At that time, the LEGO set box backs were made into the B model, even C, D, E and so on, which made the building kits reach the creative effect.

Because it was an old thing 20 years ago, there was no such thing as step-by-step subcontracting, and the parts were piled up.

It is worth mentioning that the pattern on the sticker is exactly the same as the original.

4 blocks of 16×32 backplane.

Special plates have also been opened, will this continue to re-enact the meaning of this series?

International practice, first look at people ~

There are a total of 10 people in this set, but the printing of the people in that year was quite simple, there was no back print, and there were many repetitions in the expression.

The hat on the left was replaced.

The next two people’s hats are also replaced.

In addition, the thing on the right hand should be a speaker, and the music version is changed to not know what it is.

The sign on the “Captain” hat was printed on the back…

Carriage.

These few should look like villains from expressions and clothes…

At that time, Lego had a lot of such demon expressions. Now it seems that it is very domestic?

In addition to the green clothes, the hats of the other three were replaced.

fortress

Legoredo is the name of this fortress and consists mainly of four parts.

Look at the main entrance first. The original pieces of grass are all missing…

The back structure is very simple.

Side part. There is only one wall…

On the other side there is a side door and a post.

There are gold coins hidden under the rockery.

Finally, the headquarters is like a small house.

On the side of the shelter there is a box of guns.

On the second floor there is a table where poker gambling is taking place.

There is a small organ here. Turning the table will open the chair down, and the person sitting on it will drop to the lower floor.

Parts that LEGO has abandoned for a long time are also completely re-enacted.

The way the door is locked is primitive.

The four parts are enclosed to form a fortress.

There are many flaws in the original design of this old thing. The biggest problem is that the manual is not clear. Each step does not clearly indicate which parts to use. When assembling, you must compare yourself with the previous ones. If you are used to the new version of the small partner, you may be a little uncomfortable.

Since this set is already a product 20 years ago, many of the parts have been eliminated. However, I can’t think of the nearly 100% of the pieces, and they are all engraved. For those of me who have experienced the parts of the year, the nostalgic feeling is full, very praise!

You can see similar products here