Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

✔Brand Name: LEPIN

✔ Item No: 16050

✔Compatible: LEGO 21310

✔Pieces: 2294

✔Ages: 6 years and above

I also mention here again. For “me” it is the best quality Lepin set I have.
All stones are stuck. These include 1er plates and tiles.
However, the doors have now been spoiled. When closing, they bend slightly. So that means the cams are too big or the doors too long and do not fit 100% in the frame.
All construction phases were counted very accurately. Not a single part was left over after the respective construction phase.Incidentally, no one was missing. The small spare part bag will remain unopened.

Since GGAM has not included any instructions, I had to resort to the L3GO pendant and can thus confirm that everything can be 100% “nqchgebaut”.

The building is built very solid, but unfortunately also implemented a bit wasteful. One could well have built a wine cellar / treasury or other in the back.
Ansich it is very detailed equipped. Almost overloaded for my taste.

What I do not like is the chimney. This is just on the plate and ensprechend diagonally in the installed state. Straight up I would have found personally successful.

There are only a few printed parts. The name tag, and the usual …. money, murals, cards …
It means in reverse …. so there are some stickers. These are of good quality and delicately translucent.
The respective part colors were not quite hit. But I almost think that it will be similar to the Danes.

minifigs

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Here is the substructure. I think super substructure made of wood. You can see them later only through the site.
Theoretically, the rear part would be “walkable”. In my opinion unfortunately a little wasted space. Here I would have found a wine cellar, an old pirate’s treasure or a fish storage appropriate.
Well, I also think the indicated rock formations.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Here are the pictures after step 2. It will be colorful. different wood tones …
The lower tiled level bulges a bit. In the later course of the construction, you hardly see it.
It may be because there is a small cavity on the left.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

The interior is created. To get back to the tile theme … mMn would not have been here 1.er tiles are used, but 1×2 or the triangular.
The folding lower wall was also colorfully designed.
Slowly also the outer detail-rich takes shape.
Anyone who has not received a rotary worm in modular construction yet will get their money’s worth here.
The stone rows and the later Verplankung let the model rotate continuously. Personally, it annoyed me a bit.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

The interior is growing slowly. For the upper part of the building is quickly increased. Everything first without planking.
Meanwhile, the upper balcony with its wooden pillars is completed.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

The fishing shop was lavishly equipped. Since there are still the 3 fish boxes are housed, I think the whole thing is almost overloaded.But also very detailed.

 

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Here is already the 2 folding door and he gable finished. Then there is again rotation with the planking. Here again a picture in the fishing shop.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

And here you can admire the detailed roof. As I said. The chimney is inclined later. If you could have made mMn better.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

Subsequently, the construction of the small tower with weathercock and telescopes took place.

On the whole, I’m very happy.

Currently it’s “fitting” here. Whether this is such a good idea, time will tell. Apart from that you could expand with time by a small boat and sea / sea.

So. More I just can not think of. Except the transport due to some parts have scratches.

Review LEPIN 16050 Old Fisherman’s Hut – Compatible with LEGO 21310

You can see similar products here

Review LEPIN 20097 Porsche 911 Rsr

Review LEPIN 20097 Porsche 911 Rsr – Compatible with LEGO 42096

✔Brand Name: LEPIN

✔ Item No: 20097

✔Compatible: LEGO 42096

✔Pieces: 1580

✔Ages: 6 years and above

Celebrate an icon of engineering excellence with the LEPIN Technic 20097 Porsche 911 RSR. Produced in partnership with Porsche, this replica captures the vehicle’s potent visual appeal with its sharp contours and aerodynamic detailing, together with a rear wing with ‘swan neck’ mounts, extended rear diffuser and specially developed side mirrors.

Lepin 20097 Porsche 911 RSR

This collectible toy automobile also functions an genuine white, red and black shade scheme and a sticker sheet for more detailing.

 

Lepin 20097 Porsche 911 RSR

Functions include things like a noticeable, operating differential, independent suspension and a 6-cylinder boxer engine with moving pistons positioned in front of the rear axle, although the available cockpit functions a radar display, operating steering, fire extinguisher method and even a track map of the Laguna Seca circuit printed onto the driver’s door.

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Porsche 911 RSR replica model with a wealth of genuine functions, together with a rear wing with ‘swan neck’ mounts, extended rear diffuser and aerodynamic side mirrors, plus black spoked rims and sensible head and tail lights. Also contains a comprehensive cockpit, operating differential, independent suspension and a 6-cylinder boxer engine with moving pistons positioned in front of the rear axle.

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Black spoked rims, sensible head and tail lights and an genuine white, red and black shade scheme with sticker detailing include the last touches to this amazing LEPIN Technic Porsche 911 RSR model, a fantastic show piece for the house or workplace!

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Porsche 911 RSR measures in excess of 5” (13cm) large, 19” (50cm) prolonged and 7” (20cm) broad.

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Open the doors to entry a cockpit packed with sensible particulars, together with a radar display, operating steering, fire extinguisher method and a track map of the Laguna Seca circuit printed onto the driver’s door.

Lepin 20097 Porsche 911 RSR

Test out the 6-cylinder boxer engine with moving pistons

Lepin 20097 Porsche 911 RSR

LEPIN Technic sets attribute sensible motion and mechanisms that introduce youthful LEGO builders to the universe of engineering in an approachable and sensible way.

Lepin 20097 Porsche 911 RSR

LEPIN Technic Series: LEPIN Technic 20097 Porsche 911 RSR with LEPIN 20087 McLaren P1 Hypercar

Lepin 20097 Porsche 911 RSR

LEPIN Technic 20097 Porsche 911 RSR examine with LEPIN 20087 McLaren P1 Hypercar and LEPIN 20086 Bugatti Chiron.

Lepin 20097 Porsche 911 RSR

You can see similar products here

LEPIN 20097 Porsche 911 Rsr

Review LEPIN 20097 Porsche 911 Rsr – Compatible with LEGO 42096

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name:  Porsche 911 RSR
  • No.: 20097
  • Listing Date: 2018
  • Number of parts: 1580
  • Ages: 6+

LINK YOUTUBE

Celebrate an icon of engineering excellence with the LEPIN Technic 20097 Porsche 911 RSR. Developed in partnership with Porsche, this replica captures the vehicle’s powerful appearance with its sharp contours and aerodynamic detailing, including a rear wing with ‘swan neck’ mounts, extended rear diffuser and specially designed side mirrors.

Lepin 20097 Porsche 911 RSR

This collectible toy car also features an authentic white, red and black color scheme and a sticker sheet for additional detailing.

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Functions include a visible, working differential, independent suspension and a six-cylinder boxer engine with moving pistons positioned in front of the rear axle, while the accessible cockpit features a radar screen, working steering, fire extinguisher system and even a track map of the Laguna Seca circuit printed onto the driver’s door.

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR

Porsche 911 RSR replica model with a wealth of authentic features, including a rear wing with ‘swan neck’ mounts, extended rear diffuser and aerodynamic side mirrors, plus black spoked rims and realistic head and tail lights. Also includes a detailed cockpit, working differential, independent suspension and a six-cylinder boxer engine with moving pistons positioned in front of the rear axle.

Lepin 20097 Porsche 911 RSR

Lepin 20097 Porsche 911 RSR Lepin 20097 Porsche 911 RSR Lepin 20097 Porsche 911 RSR Lepin 20097 Porsche 911 RSR

Black spoked rims, realistic head and tail lights and an authentic white, red and black color scheme with sticker detailing add the final touches to this awesome LEPIN Technic Porsche 911 RSR model, a perfect display piece for the home or office!

Lepin 20097 Porsche 911 RSR Lepin 20097 Porsche 911 RSR Lepin 20097 Porsche 911 RSR Lepin 20097 Porsche 911 RSR Lepin 20097 Porsche 911 RSR

Porsche 911 RSR measures over 5” (13cm) high, 19” (50cm) long and 7” (20cm) wide.

Lepin 20097 Porsche 911 RSR Lepin 20097 Porsche 911 RSR Lepin 20097 Porsche 911 RSR

Open the doors to access a cockpit packed with realistic details, including a radar screen, working steering, fire extinguisher system and a track map of the Laguna Seca circuit printed onto the driver’s door.

Lepin 20097 Porsche 911 RSR Lepin 20097 Porsche 911 RSR Lepin 20097 Porsche 911 RSR

Check out the six-cylinder boxer engine with moving pistons

Lepin 20097 Porsche 911 RSR

LEPIN Technic sets feature realistic movement and mechanisms that introduce young LEGO builders to the universe of engineering in an approachable and realistic way.Lepin 20097 Porsche 911 RSR

LEPIN Technic Series: LEPIN Technic 20097 Porsche 911 RSR with LEPIN 20087 McLaren P1 HypercarLepin 20097 Porsche 911 RSR

LEPIN Technic 20097 Porsche 911 RSR compare with LEPIN 20087 McLaren P1 Hypercar and LEPIN 20086 Bugatti Chiron

Lepin 20097 Porsche 911 RSR

You can see similar products here

REVIEW LEPIN 17002 Eiffel Tower 1:300 Scale – Compatible with LEGO 10181

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name: Eiffel Tower 1:300 Scale
  • No.: 17002
  • Listing Date: 2018
  • Number of parts: 3478
  • Ages: 16+

LINK YOUTUBE

Created by popular demand, the Eiffel Tower is a stunning model for construction and display, built to 1:300 scale from the real tower’s original blueprints. From the flag at the top to the elevators and other realistic details, this is as authentic as it gets.

Eiffel Tower stands 42.5″ (108 cm) high and base measures 20″ x 20″ (50 cm x 50 cm)!

Can be disassembled in 3 sections for easy transport and storage!

This set is more complicated than others because it has many very small and similar pieces. You can refer to the instructions to complete the assembly quickly and smartly.

This is a 100% LEGO compatible Creator knock off set.

This is a 100% LEGO replica knock off building blocks and bricks set from LEPIN.

You can see similar products here

 

 

 

 

 

 

 

 

 

 

 

 

 

REVIEW LEPIN 20083 Forest Harvester – Compatible with LEGO 42080

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name: Forest Harvester
  • No.: 20083
  • Listing Date: 2018
  • Number of parts: 1003
  • Ages: 12+

LINK YOUTUBE

Hello everyone! Today is the 18-year technology series, forest harvester, this is my first set of pneumatic technology, so the freshness is very strong! What is the performance of this replica? Is it worth it? Start evaluating now~

Box photo

Like other new products this year, it is a two-variable model, but the A mode is more pleasing, so this evaluation is based on this.

The box is bigger than the content…

Instruction manual

I saw a total of 3 steps subcontracting, and only the A mode, if you want to spell the B mode, you have to download the relevant manual from the original official website.

Sticker

Pattern printing and color are not bad, but unfortunately it is cut and won a B…

Parts package

Musical spelling, I believe everyone is familiar with it, can’t be cooked again?

There are also tires, hoses, motor parts and pneumatic parts.

Assembly process

Because there are more pneumatic parts, there are a lot of structures that can’t be bothered when assembling. (It’s as if you don’t have a pneumatic look.)

The model is basically completed.

Plus the huge “ree harvester” is finished!

Next, of course, the finished product is multi-faceted~

detail

Harvesting claws with huge saw blades.

The parts connected to the pipes were tight and no leaks were found.

Cab.

Forced ratio

Pneumatic parts that support the huge harvester.

Engine part.

Very convenient to replace the design of the battery.

Power switch section.

At the bottom, there are structures such as suspension and synchronous steering.

Come to a photo like “A lion head”

to sum up

For me who first came into contact with the pneumatic part, this set is undoubtedly a perfect score on freshness. I am also fortunate to have a good performance in the function, so that I can experience this interest at a relatively low price.

A little different from the mechanical drive, the aerodynamic reaction will be slightly slower, and the claws feel less sensitive than the giant arm. (Of course, I don’t rule out that I didn’t fight well)

In terms of parts, it is as good as the other new ones. I have not found any loose or too tight conditions.

The overall performance is excellent, it is recommended to try to experience what aerodynamic structure friends start.

You can see similar products here

 

Review LEPIN 05146 Sandcrawler compatible with LEGO 75220

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name: Sandcrawler
  • No.: 05146
  • Listing Date: 2018
  • Number of parts: 1388
  • Ages: 12+

LINK YOUTUBE

Box photo

Content

Instruction manual

This set has no stickers.

Assembly process

There are a total of 9 steps to subcontract.

It seems to see strange things here…

International practice, first look at people ~

Luke

Both sides of the expression are winning, printed high

Medical Droid

God has replaced…

The best thing to laugh is to force the original printing to be printed.

RA-7 and R5-A2

Strange to have a mold of RA-7? I thought I would see the head of the C-3PO.

Jawa

It has appeared many times.

Finished multi-faceted photo

detail

The parts performed well!

The degree of occlusion of the joint member is also ok.

A small vehicle for delivering supplies is placed inside.

Cockpit.

The 2 sides of the tail can be picked up.

The top and side panels are also detachable.

The active robotic arm, the parts are not loose at all!

The prints are concentrated here, and the quality is good.

Twist the tail This gear controls the steering of the wheel.

Compared with the volume of the UCS version.

It’s just a father and son…

to sum up

The performance of this piece of music is actually quite good, but unfortunately, the previous UCS version is really excellent, and the advantages of this set are completely covered.

However, the design of the sand barrier can kill a large number of brown parts, and killing meat is also a good choice.

Review LEPIN 33001 Wild West Fort Legoredo competiable with LEGO 6769

Review LEPIN 33001 Wild West Fort Legoredo competiable with LEGO 6769

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name: Wild West Fort Legoredo
  • No.: 33001
  • Listing Date: 2018
  • Number of parts: 742
  • Ages: 12+

LINK YOUTUBE

Today brings a special set of special, from the ancient series more than 20 years ago, a flagship set in the west.

This set first appeared in 1996 and is numbered 6769. Then re-enacted in 2002, the number is 6762 (I don’t know why the number will be before the first edition…)

package

I am going to reclaim the things I had 20 years ago, and I saw from the box that this should be copied from the original…

At that time, the LEGO set box backs were made into the B model, even C, D, E and so on, which made the building kits reach the creative effect.

Because it was an old thing 20 years ago, there was no such thing as step-by-step subcontracting, and the parts were piled up.

It is worth mentioning that the pattern on the sticker is exactly the same as the original.

4 blocks of 16×32 backplane.

Special plates have also been opened, will this continue to re-enact the meaning of this series?

International practice, first look at people ~

There are a total of 10 people in this set, but the printing of the people in that year was quite simple, there was no back print, and there were many repetitions in the expression.

The hat on the left was replaced.

The next two people’s hats are also replaced.

In addition, the thing on the right hand should be a speaker, and the music version is changed to not know what it is.

The sign on the “Captain” hat was printed on the back…

Carriage.

These few should look like villains from expressions and clothes…

At that time, Lego had a lot of such demon expressions. Now it seems that it is very domestic?

In addition to the green clothes, the hats of the other three were replaced.

fortress

Legoredo is the name of this fortress and consists mainly of four parts.

Look at the main entrance first. The original pieces of grass are all missing…

The back structure is very simple.

Side part. There is only one wall…

On the other side there is a side door and a post.

There are gold coins hidden under the rockery.

Finally, the headquarters is like a small house.

On the side of the shelter there is a box of guns.

On the second floor there is a table where poker gambling is taking place.

There is a small organ here. Turning the table will open the chair down, and the person sitting on it will drop to the lower floor.

Parts that LEGO has abandoned for a long time are also completely re-enacted.

The way the door is locked is primitive.

The four parts are enclosed to form a fortress.

There are many flaws in the original design of this old thing. The biggest problem is that the manual is not clear. Each step does not clearly indicate which parts to use. When assembling, you must compare yourself with the previous ones. If you are used to the new version of the small partner, you may be a little uncomfortable.

Since this set is already a product 20 years ago, many of the parts have been eliminated. However, I can’t think of the nearly 100% of the pieces, and they are all engraved. For those of me who have experienced the parts of the year, the nostalgic feeling is full, very praise!

You can see similar products here

Review MOC-4889, LEGO mixed LEPIN FJ40 Crawler

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name: FJ40 Crawler
  • No.: 4889
  • Listing Date: 2017
  • Number of parts: 351
  • Ages: 9+

LINK YOUTUBE

I order it on Christmas.Two days later it was delivered. No missing pieces and the colors were genuine.

The first engraving in life (except for the small steel guns that have been commercialized)! ! If I don’t see someone on the free fish, I’m not going to have a bad idea. Even so, FJ40 changed me to buy one after the other. Because it is the same as the small steel gun, I have sent it here, and I bought a small steel gun for the purpose of fighting these two cars FJ40 and Blue Buggy.

This is the lower part of the car including wheels and engines.

After two hours of assembly
A perfect combination of LEGO and LEPIN

Picture of previous

Picture of behind

portrait of the whole car

The design of FJ 40 is really clever – it uses the “linear steering” I have never seen in the official SET, and the automatic shifting of the motor is also very good – the reduction is extremely high. It was originally designed for off-road and climbing, and the speed is not very fast.

In short, you can see the photo, it is really super handsome! ! As for the speed, perhaps because of the weight of the car, it feels slower than the small steel cannon (it has not really been compared), but considering that it is (almost) all-terrain, I personally prefer FJ40, I don’t care about the venue. Just control the car and run.^^

You can see similar products here

Review LEPIN 20033 RC Tracked Racer Competiable with LEGO 42065

Review LEPIN 20033 RC Tracked Racer Competiable with LEGO 42065

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name:RC Tracked Racer
  • No.: 20033
  • Listing Date: 2017
  • Number of parts: 397
  • Ages: 9+

LINK YOUTUBE

Last week I just bought a set of LEPIN 20033 RC Tracked Racer and now has time to review.

I take two hour to complete it

And ‘the boy’ here

There is also a control panel
Great!

Parts details of the vehicle

It is reasonable to say that this so-called “buy PF to send building blocks” set, without the need for PF, is a relatively cost-effective choice. If you want to go through the Taobao salted fish, there is no ready-made meat package to buy. Fortunately, if you don’t consider the color, there is nothing special about the whole car, so it is still a good time.
M motor is Lego, remote lithium battery from the double eagle, other pieces of LEGO made in China.
The chassis and the car shell are two parts that are assembled independently. When the chassis is assembled, it can be sprinkled. Because the large battery box and receiver are replaced by remote lithium battery, the pure chassis is very light, and it is a floating on the tile, and it is not very interesting to play. Therefore, the car shell is necessary as a counterweight or aesthetics.
Without the support of the large battery box, it is necessary to additionally attach the parts of the unit height to the rear frame of the chassis to avoid the car shell directly on the front M motor.

Look from the top

Seen from behind

From horizontal

The remote control mode of this car is very fast for children. After all, the two joysticks directly correspond to two motors, and the turning principle is simple and rude.
In the absence of non-slip particles, climbing ability is still relatively limited.#.#

You can see similar products here

Review LEPIN 20032 BMW R 1200 GS Adventure Competiable with LEGO 42063

Review LEPIN 20032 BMW R 1200 GS Adventure Competiable with LEGO 42063

ORIGINAL INFORMATION

  • Brand: LEPIN
  • Name: BMW R 1200 GS Adventure
  • No.: 20032
  • Listing Date: 2017
  • Number of parts: 419
  • Ages: 16+

LINK YOUTUBE

A quick one-set MOC I made,Iwanted to keep the same features as the original model,so there is front and rear suspentions, stearing, shaft driven rear wheel, working flat 2 pistons engine and a kickstand.

Firstly I put the bags and puzzle pieces into a box to avoid the lack of pieces and for more assembly.

I completed the installation of the car pretty quickly, taking about an hour and a half and fortunately there is no shortage of pieces

Tadaaa…

Here are the details of it

motorcycle head

body and engine

The picture is in front and photo at tilt angle

 

Look from the top

brumz brumz…

This is my moto collection

Try assembling a super motorcycle and express your feelings^^

You can see similar products here